Ordered before? Send us your part numbers, including your custom SKUs, and we will turn the reorder around. Ordered before? Reorder

AVA Cath-In-Cath 2 Port System™ (Titanium)

The AVA Cath-In-Cath 2 Port System™ is a unique access port and access system developed exclusively for preclinical researchers. Our port system utilizes features researchers have wanted for years but have been unavailable in a single device.

Cath-In-Cath 2 titanium vascular access port with infusion set Cath-In-Cath 2 low-profile titanium port, shown alongside the standard profile

Those features are low volume, a low profile, superior needle and infusion set retention, and the ability to restore bidirectional patency, across multiple species, vessels and applications. What sets these ports apart is that a kink-resistant Cath-In-Cath™ infusion catheter passes through the port and into the vessel catheter. The Cath-In-Cath catheters, with the tapered catheters designed for them, give a more secure infusion set to port connection than a needle in a septum. The flexible cannula does far less damage to the port site and does not require extensive wrapping like a conventional needle and port connection and means less needle stick exposure. The Cath-In-Cath 2 Ports™ can also utilize standard non-coring needles when desired. With the Cath-In-Cath 2 you have the ability to utilize several gauge sizes and materials with the internal catheters, not just one. The linear design allows for advancing; flow probes, temperature probes, guide wires and other catheter materials into the guide catheter.

Features

  • Less Needle Accessing
  • Ultra low volume system
  • Flexible Cath-In-Cath™ set helps prevent disconnect
  • Ability to clear obstructions with guide-wire
  • Uses 19 ga, 20 ga and 24 ga CIC infusion sets
  • Very low profile

Specifications

MaterialsTitanium, Silicone, Dacron®
CATH-IN-CATH2 ULTRA LOW PROFILE TITANIUM8mm H x 18mm L • 15μl appx V • Titanium, Silicone, Dacron®
CATH-IN-CATH2 LOW PROFILE TITANIUM11mm H x 19mm L • 30μl appx V • Titanium, Silicone, Dacron®
ApplicationsThis port system has been utilized for multiple species, vessels and applications.

Sizes and part numbers

SIZEMATERIALIDODLENGTHBEADSCAT. NO.
3-6 FrenchPolyurethane0.5mm-1.0mm0.94mm-1.9mm60cm4 &5cm from tipAULP-36
4-6 FrenchPolyurethane0.5mm-1.0mm0.94mm-1.9mm60cm10 &11cm from tipAULP-46
6 FrenchPolyurethane1.0mm1.9mm60cm15 &16cm from tipAULP-6
3-6 FrenchPolyurethane0.5mm-1.0mm0.94mm-1.9mm60cm4 &5cm from tipALAT-36
4-6 FrenchPolyurethane0.5mm-1.0mm0.94mm-1.9mm60cm10 &11cm from tipALAT-46
6 FrenchPolyurethane1.0mm1.9mm60cm15 &16cm from tipALAT-6

Order or ask first

Tell us the species, the access site and the study duration and we will confirm the right configuration before you raise a purchase order. If the right answer is something we do not make, we will say so.

Engineer Surgeon Quote